log in

Walk-DVR 3rd

Mobile Video Recorder 3rd generation

Walk-DVR-CF

The Walk-DVR 3rd generation is a small triplex digital video recorder with low energy consumption. Compression and storage management is performed by a dedicated, specially developed processor that was designed precisely for security video tasks.

Each image of the video stream is compressed individually. It uses the JPEG2000 wavelet-based compression algorithm, providing high-quality images.

The device is suitable for special application areas such as video surveillance in vehicles, or ATM monitoring where viewing small sizes is an immense advantage.

The Walk-DVR 3rd generation comes in two types. One has a basic design and another is extended by a hybrid storage system that contains a notebook HDD and an additional CF card. This special development allows the Walk-DVR-CF to operate reliably even under extreme environmental conditions. The built-in accelerometer and temperature sensors measure the vibration and heat level inside the device. When they reach a dangerous limit, the system switches off the HDD and continues the recording on the CF card. Once the environmental conditions have stabilized, the hard drive turns on again and the images are copied from the CF card onto the HDD.

Product Profile

  • The device uses a notebook hard disk and two CF cards to store pictures.
  • Over LAN or built in HSPA+ modem
  • Central and Local Monitoring
  • Live view and synchronized archive view from one or more cameras
  • Adaptive download manager for GPRS
  • Event and GPS position monitoring

  • Storage on notebook HDD
  • 4/8 analog cameras
  • JPEG2000 compression standard
  • Intelligent power management
  • 4 Programmable inputs
  • 4 Programmable outputs
  • 4 Audio channels
  • RS232 (optional); RS485 (optional)
  • Remote video management with free SCPlayer software or with the Control Center

  • Hybrid recording system containing an HDD and 2 CF cards
  • 4/8 analog cameras
  • JPEG2000 compression standard
  • Intelligent power management
  • 4 Programmable inputs
  • 4 Programmable outputs
  • 4 Audio channels
  • Built-in GPRS modem, 3.75G UMTS/HSPA+ (optional)
  • Built-in GPS module (optional)
  • RS232 (optional); RS485 (optional)
  • Remote video management with free SCPlayer software or with the Control Center

hvss

Wireless video surveillance with Walk-DVR

The GSM system enables wireless video surveillance where there is no LAN network.

The Walk-DVR-CF has a built-in HSPA+/GSM modem. Thanks to this modem, the Walk-DVR can connect to the surveillance center. You can configure and observe your recorder, and download both live and archived videos from the Walk-DVR through the GPRS network.


Wireless video surveillance with Walk-DVR through GSM network

gprs

The GPS is a global localization and navigation system. This satellite system works 24 hours a day everywhere on Earth. The GPS system measuring works regardless of the weather, the time of day, the position above sea level and the motion speed. The Walk-DVR-CF has a built-in (optional) GPS receiver. The recorder can define its position and speed thanks to this receiver. The received GPS coordinates and speed data are stored in the actual recorded picture header. The GPS information can be shown in the picture during the live or archived video replay. You can export the live or archived video's GPS coordinates to the Google Maps application from the SCPlayer.

GPS infomation in Walk-DVR system

gps

For technical specification please find the data sheet of the Walk-DVR >> Download

For technical specification please find the data sheet of the Walk-DVR-CF >> Download

Log in or create an account